TILT MOUNT - 360 VIEW

Flat roof icon2

Explore our Tilt Mount System from every angle. Use the controls at right to change the viewing angle and add solar panels.

Nw off Nw on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

N off N on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

Ne off Ne on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

E off E on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

Se off Se on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

S off S on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

Sw off Sw on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

W off W on

Universal Fastening Objects (UFOs)

UFOs are one-size-fits-all, single-piece fasteners that quickly and securely bonds solar modules to XR Rails. It comes lubricated and assembled, with a sleek, low-profile design. Simply snapping on a Stopper Sleeve transforms the UFO into an end clamp.
UFOs are made of stainless steel and available in clear or black finishes. Ufos double

XR Rails

360viewrailpopup

XR Rails are the backbone of the solar array. Their unique curved profile increases structural strength and spanning capability, allowing for fewer roof penetrations and more cost-effective system designs.

XR Rail are available in three targeted sizes: XR10, XR100 & XR1000. Each size supports specific design loads, while minimizing material costs. Depending on your location, there is an XR Rail to match.

All XR Rails are made of marine-grade aluminum alloy, then protected with an anodized finish. Anodizing protects against surface and structural corrosion, while also providing a more attractive appearance.

Tilt Legs

Tiltlegkit

Tilt Legs are available in multiple lengths to support a wide range of mounting angles. The Fixed Tilt Leg Kit includes a North & South Tilt Leg, plus hardware for attaching to XR Rails.

South Tilt Legs come assembled and feature angle indicator markings to simplify installation. North Tilt Legs consists of a slotted aluminum tube and a pivot bracket for full adjustability.

Stopper Sleeve

Stopper 3 360

The Stopper Sleeve snaps onto the IronRidge UFO to transform it into an end clamp.

It comes in clear and black finishes and 6 different sizes to accommodate a range of module frames.

Questions?
X

Ask IronRidge Support